JDY-10 Bluetooth 4.0 module BLE Bluetooth serial port transparent transmission module compatible with CC2541 slave Bluetooth -10M
Product Descriptions:
Copy the JDY-10 data cloud storage link and download the webpage: http://pan.baidu.com/s/1dFzIb6L
JDY-10M Data Network Disk Link Copy webpage download: Link: https://pan.baidu.com/s/1T3PaxMABOv1CeAyZqGjtlQ Password: oojd
Model: JDY-10 Bluetooth 4.0 Slave Module
Kernel: M0
Communication interface: serial port
Working voltage: 1.9-3.6V
Communication distance: 100 meters (some modules have higher transmission power, and the communication distance is much farther than previous modules)
Working current: 90ua
Suspen mode: 14 uA
Module: Bluetooth 4.0 slave
The JDY-10 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency range of 2.4GHz, modulation mode of GFSK, high transmission power of 8db, and a large transmission distance of 80 meters. It has the characteristics of low power consumption, small size, strong signal, and stable data transmission.
Product Features：
1: Support, iOS mobile data transparency
2: Support low power consumption (standby current can reach several uA)
3: Supports GPIO and UART peripheral interfaces
4: Support AT command operation
5: Can be certified by standards such as FCC/CE
Product application scope：
1: Bluetooth LED lighting
2: Motor adjustment and other products
3: Anti loss alarm and other products
4: Sports, Health, and Medical Care
5: Small household appliances
6: Automotive Electronics
Technical specifications:
Type | Specification parameters | |
Working voltage | 1.9 – 3.6V | |
Working temperature | -40 - 85°C | |
High transmission power | +8dbm | |
Antenna | PCB board mounted antenna | |
Receiving sensitivity | -92dbm | |
Average current | Wake up mode | 90uA |
Suspen mode | 14 uA | |
Deep Sleep mode | 1uA | |
Factory default configuration:
Service UUID: FFE0
Feature UUID: FFE1
Serial port baud rate: 115200bps
This module is a serial port transparent transmission module (customizable with 4 PWM outputs and 15 IO input/output ports). Customers who need customization can contact our service
AT instruction set
Users can communicate through a serial port and Bluetooth chip. The serial port uses two signal lines, Tx and Rx, with baud rate support
Holding 24004800960014400192003840057600115200. The default baud rate for serial ports is 115200bps.
Detailed instruction set description
(Note: When issuing the AT command, it is necessary to enter the carriage and wrap the line. The AT command can only take effect when the module is not connected. Once the blue
When the dental module is connected to the device, the Bluetooth module enters data transmission mode
Detailed instruction description
(The AT instruction is case sensitive and ends with a carriage return or line break character:)
1.Get version number:
Instructions | Response | Parameter |
AT+VER | +<Param> | Param：version Default：+JDY-10-V1.8 |
2. Obtain Bluetooth MAC address:
Instructions | Response | Parameter |
AT+VER | +MAC: <Param> | Param：MAC address |
3. Set Bluetooth name:
Instructions | Response | Parameter |
AT+NAME<Param> | OK | Param: Bluetooth name Default Name: JDY-10 18 bytes long |
4. Settings/Query - Transmission Power:
Instructions | Response | Parameter |
AT+POWE<Param> AT+POWE | OK +POWE: <Param> | Param：（0-5） 0：8db 1：5db 2：0db 3：-5db 4：-10db 5：-13db |
1.Settings/Query - Serial Port Baud Rate:
Instructions | Response | Parameter |
AT+BAUD<Param> | OK | Param：（0-7） 0：115200 bps 1：57600 bps 2：38400 bps 3：19200 bps 4：14400 bps 5：9600 bps 6：4800 bps 7：2400 bps |
AT+BAUD | +BAUD：<Param> |
2. Settings/Query - Broadcast Interval
Instructions | Response | Parameter |
AT+ADVINT<Param> | OK | Param：（0-6） 0：100ms 1：100ms 2：250ms 3：500ms 4：1600ms 5：3200ms 6：4800ms |
AT+ADVINT | +ADVINT：<Param> |
