Product Details
TCAN1042GVDRQ1 Overview
With the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tape & Reel (TR) package.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.This electronic part can have up to 1/1 eligible receivers/drivers on the field at once. This ic receiver has been primarily designed for applications where the operating temperature is -55°C~125°C.This line driver ic can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.As the base part number TCAN1042 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 8-pin driver IC with enhanced power dissipation control.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.Enough but no exceeding 110mA of input current should be supplied to the VCC pin of the ic receiver.This integrating circuit is one of the Automotive, AEC-Q100 series, representing an enhanced power-saving technique.
TCAN1042GVDRQ1 Features
Tape & Reel (TR) package
8 pins
Automotive, AEC-Q100 series
TCAN1042GVDRQ1 Applications
There are a lot of Texas Instruments
TCAN1042GVDRQ1 Drivers/Receivers/Transceivers applications.
Televisions
Cell phones
Wireless modems
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Product Description
Texas Instruments TCAN1042GVDRQ1
Driver 1/1 Drivers/Receivers 8 Pin 8 Terminations Drivers Interface ICs
8 Terminations 8 Pin TCAN1042 Receivers 1/1 Drivers/Receivers 1 Functions
ANSC PART# | ANSC- TCAN1042GVDRQ1 |
Part# | TCAN1042GVDRQ1 |
Type: | Integrated Circuits(ICs) |
Manufactor | Texas Instruments |
DC | new |
Package / Case | 8-SOIC |
Supplier Device Package | Tape & Reel (TR)Cut Tape (CT) |
Product Attributes
TYPE | DESCRIPTION |
Category | Integrated Circuits (ICs) |
Interface | |
Drivers, Receivers, Transceivers | |
Mfr | Texas Instruments |
Series | - |
Package | Tape & Reel (TR) |
Cut Tape (CT) | |
- | |
Product Status | Active |
Type | Transceiver |
Protocol | CANbus |
Number of Drivers/Receivers | 1/1 |
Duplex | - |
Data Rate | 5Mbps |
Voltage - Supply | 4.5V ~ 5.5V |
Operating Temperature | -55擄C ~ 125擄C |
Grade | Automotive |
Qualification | AEC-Q100 |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | 8-SOIC |
Base Product Number | TCAN1042 |
Actual image of the product
Product datasheet
For more information, please download