Product Introduction
1. Long service life: Using immersion gold quality, the touch area can be expanded, smarter and more durable.
2. Stable and reliable signal: The upgraded version adds filter capacitors, the output signal is more stable and has superior performance.
3. Low power consumption design: It is in low power consumption mode under normal conditions, energy-saving and environmentally friendly, suitable for long-term use.
4. Widely applicable voltage: supports 2~5.2V (latch type) or 2~5.5V (inching type) power supply,
strong compatibility.
5. Convenient installation: There are 4 M2 screw holes on the board, which are easy to fix and can be hidden on non-metal surfaces such as plastic and glass.
Product Parameters
Style 1: Latch Type: This module is a capacitive touch switch module based on the touch sensor chip (TTP223B) (TouchSensor(T) v2.0). The module outputs low level and the mode is low power mode ; when the corresponding position is touched with a finger, the module will output the opposite level (that is, the original output is high, and the output is low after touching; the original output is low, and the output is high after touching), and the mode is switched to fast mode ; when there is no touch for 12 seconds, the mode is switched to low power mode. The module can be installed on the surface of non-metallic materials such as plastic and glass. Parameters: Power supply: DC 2~5.2V Screw mounting hole: 4XM2 Size: Latch type: The initial state can be set to high level or low level, and the level state will change only when touched (similar to the self-locking switch function), low power consumption, more interesting to use, easy to use, and can replace the traditional self-locking switch. |
Style 2: Inching type: This module is a capacitive touch switch module (TouchSensor2.0) based on a touch sensing chip (TTP223B). Under normal conditions, the module outputs a low level and the mode is in a low power state; when the corresponding position is touched with a finger, the module outputs a high level and the mode switches to a fast response state; when there is no touch for 12 seconds, the mode switches to a low power state. Install the module on the surface of non-metallic materials such as plastic, glass, and acrylic boards to make buttons hidden in walls, desktops, etc. This module can save you from the trouble of traditional press-type buttons. |
Product parameters: Power supply: DC2~5.5V Screw positioning hole: 4xM2 Size: Momentary type:: Initial state is low level, touch is high level, no touch is low level (similar to the function of light touch button), low power consumption, easy to use, can replace traditional light touch buttons, output high level when touched, and output low level when not touched. |
Product Photos
Company Information
