Part NO | 3250B | Input power supply | 5V 2A-5A |
Power | 5w | Welding Wire: | 30MM |
Transmission distance | Conversion rate0-8mm/0-5mm | Charging power | 70% |
Coil size | Diameter 50mm; Thickness 2.2mm | Charging power | 5w |
PCB size | 32 * 32 * 3.5 mm | Executive standard | standard |
Attention: This product cannot be connected to the vehicle What does it mean to not pick up the car? If you want to use the 12V positive and negative poles of the car cigarette lighter, and the voltage of the car cigarette lighter is unstable, the output is actually 10-15V. The car model with voltage stabilization function can be directly connected. If you are using a data cable to power the wireless charging, you can use a non car model with a port (type-C)
FAQ
1、Q: Is the coil divided into front and back sides? How is the correct placement? Answer: The transmitting coil is facing the receiving end of the phone (placed on the back)
2、Q: What is the charging speed of 5V input? Answer: The 5V input is the 5W output, and fast charging is only available for 9/12V input. In addition, the USB port voltage of the car is 5V, and an on-board fast charging head needs to be added to enable fast charging
3、Q：Can the black porcelain chip on the back of the wireless charging coil be removed? Answer: No, the black porcelain plate on the back of the coil is a magnetic separator. Removing it will cause the wireless charger to malfunction. Micro cracking of ceramic tiles does not affect charging
